Compact Modular Vacuum Lifting System adapts to the demands of the job

The new CM 3 Compact Modular Vacuum Lifting System from Vacuworx is changing the game for contractors who run compact equipment such as skid steers, track loaders, articulating wheel loaders and mini- excavators on the job every day — now allowing them to handle materials such as concrete slabs, steel plates and pipe up to 6,600 pounds with ease. With standard mounting, the plate weighs the same as a standard skid steer bucket, so it doesn’t affect the lift capacity of the host machine. The rugged all-steel unit is designed to accommodate single- or double-pad configurations interchangeably to be able to lift a variety of material weights and sizes. The adjustable spreader bar for double pads extends from 61 to 85 inches (measured from outside to outside of the seal channels). The CM 3 is operated by a hydraulically driven vacuum pump using the auxiliary hydraulics from the host machine (minimum 10 GPM required with maximum 3,000 psi). With quick-connect hydraulic hoses and a universal mounting plate assembly, the CM 3 can be attached to a variety of host machines in a matter of minutes. In addition, the unit is equipped with a factory preset flow control valve to ensure optimal performance with any equipment. Designed for both job site durability and practicality, the CM 3 comes with steel legs for storage, which can either be removed or rotated when the system is in use. ? (918) 259-3050 à www.vacuworx.com