The Concrete Protector’s Quick Patch is a quick-curing two-component, zero-VOC, low-odor, liquid-applied, polyurethane concrete repair material designed to repair concrete and masonry substrates. Quick Patch will protect concrete from harsh weather, corrosion, erosion, freeze/thaw spalling and common chemical exposure.
Typically, new concrete does not bond to old concrete without creating a “cold joint” or weak seam where the two meet. The average strength of concrete is 2,500-to-4,000 psi.
Quick Patch has an extremely strong 4,700 psi tensile strength but still maintains slight flexibility with 35 percent elongation. Quick Patch bonds permanently to concrete, wood, metals, fiberglass, and rigid plastics. Quick Patch is an extremely thin fluid that fills all fine imperfections to quickly penetrate and lock to the substrate. Quickly and dependably secure anchor bolts, fasteners, or lifting lugs with Quick Patch.
The Concrete Protector’s Quick-Patch has the ability to repair any concrete damage and while hardening in just minutes. With 4,700 psi tensile strength, Quick Patch is actually stronger than the original concrete.
Features
- Rapid Cure Allows Traffic to Resume in Minutes
- Waterproof
- Excellent Abrasion Resistance
- Remains Slightly Flexible in a Wide Range of Temperatures
- Low odor
- Solvent free
- Grey once cured
Typical Uses
- Pavement Divots
- Replaces missing portions of concrete
- Filling holes or profiling very rough areas
(877) 743-9732
