Cemtec has introduced a new one component, stampable overlay system to its line of resurfacing and concrete repair products. Cemtec One Stop Stamped Overlay contains special additives that provide high flexural and bond strength, low shrinkage, exceptional trowelability and improved pot life and working time in hot temperatures.
The product needs only clean water for mixing, so it is simpler to use and saves freight by not having to ship additional mixing liquid. There are 30 standard colors available for integral coloring and antiquing. Custom colors and factory blended coloring is available on large projects. A water-based sealer, liquid release agent concentrate and a powdered non-chlorine accelerator additive round out the system. One Stop Stamped is a one component pre‐blended product that requires only the addition of water. You can use this product both horizontally or vertically on existing masonry and concrete surfaces. You place the material approximately 3/8” thick and then stamp it with a stamping mat or tool to create a variety of impressions such as stone, brick, tile, etc. Furthermore, you can use the product on interior or exterior floors, driveways, patios, pool decks, etc
The poduct readily accepts imprinting from stamping tools, or you can smooth trowel it for acid staining and scoring. Cemtec manufactures a wide range of concrete repair, decorative and resurfacing products at its plant near Atlanta, Georgia. For more information, please call at 888-233-6499.
