Versatile Building Products 5120 Polyaspartic has been formulated to be one of the easiest polyaspartics floor coatings to apply by roller and brush, making it an ideal topcoat to use over a variety of concrete and epoxy flooring. Versatile Building Products 5120 Polyaspartic now comes in three colors: Whisper Grey, Slate Grey and Cottonwood, the company’s most popular colors for industrial floors.
This unique formulation allows for more than 45 minutes of potlife (which is more than enough for most floor coating installers), yet the material dries in as little as 20 minutes when applied to the flooring surface. In most cases installers can get back on the floor in 60 minutes and the system will accept light vehicle traffic the next day (although care must be taken since it is not fully cured). Use 5120 when a faster turnaround time is needed. It can be installed at temperatures ranging from 30 to 100 degrees Fahrenheit.
Versatile Building Products has reduced the 5120 Polyaspartic viscosity down to levels comparable to a medium solids CRU (chemical resistant urethane). The benefits of this is that the Polyaspartic Floor Sealer is easier to install, has more pot life, cures to a hard film faster (dries in just about an hour) and is suitable for exterior exposure without yellowing. The only drawback is that 5120 Polyaspartic is considered combustible and its use should be restricted to well ventilated areas.
Use 5120 Polyaspartic Pigmented Floor Sealer when you want a solid color topcoat over your epoxy floor. 5120 is abrasion-resistant and UV-resistant and dries in under 60 minutes so the floor can get back in service quickly.
(800) 535-3325
