Arizona Polymer Flooring has announced the launch of three VaporSolve Moisture Remediation Systems, epoxy coating systems formulated to isolate moisture-sensitive flooring from all levels of concrete moisture.
VaporSolve systems can be used when concrete has a known moisture problem, when concrete dries too slowly to meet a specific construction schedule, or as a preventative measure when concrete doesn’t have a vapor retarder and future moisture conditions cannot be predicted.
The VaporSolve Basic System uses a single coat application of VaporSolve 100, a 100 percent solids epoxy. This system is applied when the concrete hasn’t been contaminated with reactive silicate curing compounds or densifiers.
VaporSolve Ultra System uses a water-based epoxy as a primer that gives deeper penetration and better adhesion when applied to silicate-contaminated concrete. The primer is finish-coated with VaporSolve 100, which greatly reduces the possibility of concrete outgassing.
Finally, VaporSolve Fresh Concrete System uses a water-based epoxy formulation to bond to concrete that’s six to 24 hours old. The finish coat is VaporSolve 100. This system eliminates water evaporation from the top of the slab.
? (800) 562-4921
www.apfepoxy.com
