Dur-A-Flex Inc., a leading manufacturer of commercial, industrial and institutional resinous floor and wall systems, has added two new concrete patch and repair products to its product line; Dur-A-Tex LM (Latex Mortar) and Dur-A-Tex UM (Urethane Mortar). With these two new additions, Dur-A-Flex is now even better equipped to provide a single-stop for flooring contractors to obtain everything they’ll need for a successful resinous floor installation.
Dur-A-Tex LM is a quick-curing, single-component latex mortar requiring only the addition of water for mixing and use. Dur-A-Tex UM is a three-component urethane mortar supplied as a pre-measured kit for simple use on-site. Both products are designed for bucket mixing and trowel application and can be applied prior to installing any of Dur-A-Flex’s Accelera, Hybri-Flex, Poly-Crete or Epoxy floor systems. Dur-A-Tex LM is supplied in 50 lb. bags and each covers approximately 0.5 cubic feet or 50 square feet at 1/8 inch. It can be applied as a skim coat up to 2 inches neat or up to 5 inches extended. Dur-A-Tex UM is supplied as a 40 lb. three-part kit consisting of a bag of aggregate and a pre-measured resin and hardener. Each kit covers approximately 0.3 cubic feet or 14 square feet at ¼ inch. It can be applied at ¼ inch to 2 inches neat or up to 6 inches extended.