Hilti rotary drill

The ergonomically designed Hilti
TE 7-C Rotary Hammer Drill is designed
for long periods of drilling in
concrete, stone and masonry, and light
chiseling on concrete and masonry.
With the lowest vibration in its
class, the TE 7-C is equipped with a
slip clutch that stays more consistent
throughout the tool’s life and makes it
possible to drill with core bits up to 2
inches in diameter. The rotary hammer
offers three modes of operation including
rotation only, rotation with hammer
and hammer only. Compatible with the
TE DRS-M self-contained dust removal
system, the TE 7-C is capable of virtually
dust-free drilling. With a removable
chuck interface, this rotary hammer can
quickly adjust for all common chuck
types.
Under Hilti Lifetime Service, the
Hilti TE 7-C will be serviced, if needed,
with no additional cost for two years.
The lifetime manufacturer’s warranty
covers the tool against manufacturer defects
for the life of the tool.
? (800) 879-8000
? www.us.hilti.com
Air compressors from Mi-T-M
Mi-T-M Corporation manufactures a
line of portable, two-wheeled, two stage,
8-gallon air compressors. The industrialstrength
air compressors come in both
electric and gasoline models.
Both models feature a quality cast
iron, two-stage compressor, with aluminum
head and splash-lubricated cast
iron crankcase and cast iron cylinder;
16.5-inch fly wheel for extra cooling and
longer life; large canister intake filter;
14-gauge powder coated two-piece belt
guard; two pneumatic tires with tubes
and steel hubs; powder-coated 8-gallon
twin tank receivers; stainless steel
braided discharge hose; regulator and
two gauges for tank and outlet pressure;
7-gauge base plate; belt tightening system;
and manual drain valves for proper
maintenance.
? (800) 553-9053
? www.mitm.com