Bonsal American Inc. has introduced a full line of ProSpec Level Set underlayments and toppings designed to correct uneven, rough areas in interior floor applications before finishing.
ProSpec Level Set 100, 200 and 300 are cement-based self-leveling underlayments that can be poured or pumped. They require no troweling and minimal finishing. Each product is polymer-modified to ensure a superior bond to the substrate and provide a smooth, even finish. These underlayments can be applied from feather-edge up to 5 inches thick. The underlayments are designed for use over a variety of substrates, including concrete or wood.
Level Set G is a gypsum-based, self-leveling underlayment that can be poured or pumped. Level Set G is designed for installation for use over concrete, wood and gypsum subfloors from 1/8 inch to 5 inches thick.
Level Set LW-60 is a lightweight self-leveling underlayment ideal for applications where load-bearing restrictions apply. LW-60 is 50 percent lighter than conventional gypsum or cement-based underlayments and can be installed from feather-edge up to 2 inches thick.
Level Set Wear Topping is a decorative option. The high-strength, self-leveling wear surface, complete with abrasion and crack resistance, provides a perfect base for decorative concrete due to its workability and acceptance of pigments, stains and colored penetrating sealers. Level Set Wear topping can be installed from 1/4 inch to 5 inches thick and will accept foot traffic in three hours.
? (800) 738-1621
www.prospec.com
