Trinic LLC has announced the new Trinic Stage II Blended Powder Hardener and Accelerator. This blended powder is an admixture formulated specifically for the production of high performance thin-section concrete.
The new Trinic admixture increases the early strength and ultimate strength of concrete with minimal effect on initial workability. The new product offsets the retarding effects of high plastisizer dosages while reducing pozzolan strength lag and delivers excellent results in normal and cool conditions where very high next day strengths are required.
With the Trinic Stage II Blended Powder Hardener and Accelerator, curing times and heat requirements are significantly reduced while concrete quality is improved. This product does not contain calcium chloride or any other intentionally added chlorides and will not initiate or promote the corrosion of reinforcing steel.
With this product your concrete has less chance of warpage, curling, or cracking after striping. Increase strength gains as much as 50 percent overnight, and of course, Trinic Stage II Blended Powder Hardener and Accelerator works well with Trinic’s GFRC Admix.
Concrete goes through three distinctive hardening/curing stages. During the first stage little or no strength is gained. During the second stage as much as 1,000 PSI per hour in strength gains can be realized while uring the third stage strength gains of 50 PSI per hour happen. Ordinary accelerators start working the second they contact the cement, shortening the working time of stage one. Trinic Stage II accelerator and hardener is designed to start working during the second stage of strength development.
(607) 655-1517
