ArmorPrime Ultra-Fast, New Epoxy System from Thermal-Chem

ArmorPrime Ultra-FastThermal-Chem recently added ArmorPrime Ultra-Fast to its floor coatings line. The two-component, pigmented, fast-curing epoxy resin system is designed as a rapid-cure prime coat or as a basecoat for industrial floor systems where downtime needs to be kept to a minimum. It has a cure time of around 2 1/2 hours at 75 degrees F.

The design of this pigmented epoxy primer allows it to deeply penetrate concrete and create a tenacious bond. Used as a prime coat, it will promote adhesion and also help reduce outgassing from porous or heavily abraded concrete under any of Thermal-Chem’s resurfacers and topcoats.

Typical uses for ArmorPrime Ultra-Fast include:
  • Reduced out-gassing bubbles, due to porous and heavily abraded substrates.
  • As a rapid prime coat where you need the floor to return to service quickly.
  • As a rapid cure basecoat in the DecoFlake system.
  • Increased adhesion capabilities for all resurfacers.

You can also use this rapid-cure system as a basecoat in the company’s DecoFlake and DecoQuartz systems. Additionally, you can broadcast the color chips and colored quartz aggregate directly into the ArmorPrime Ultra-Fast.

About Thermal-Chem

Thermal-Chem has been a proven leader in advanced polymer technology for over 44 years. The company has some of the most sophisticated and innovative floor protection products on the market today. For more information on the ArmorPrime Ultra-Fast line, you can either visit www.thermalchem.com, email [email protected] or call (847) 288-9090.

Got more questions about your project?

  • Drop files here or
    Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB.
      Allowed formats: jpeg, jpg, gif, png, pdf
    • How would you like us to respond?

    • Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers.