Total Solution Technology has released Top Finish Concrete Resurfacer, Top Finish Self-Leveling Compound and Top Finish Adhesives.
Top Finish Concrete Resurfacer is a 100 percent concentrate, high-strength, non-sag and non-shrinking mixture of portland cement, co-polymer and cement additives engineered to restore structurally sound yet worn concrete surfaces. Sand and water must be added in the mix. The mixture can be applied by a crew or by one person.
The multipurpose repair material is used in concrete rehabilitation systems or stucco-mortar refinishing systems. It can be rolled, trowel, squeegee or sprayed and can be colored using powder iron oxide pigments, liquid concrete colors, acid stain or dyes. Top Finish can be applied in a variety of colors, forms and textures used in residential, commercial or industrial coatings.
Top Finish Self-Leveling Compound is a 100 percent concentrate product that can restore structurally sound yet worn concrete in preparation for floor coverings. Self-Leveling Compound provides an exceptionally smooth, uniform surface without air bubbles, while also offering high abrasion resistance, flexural and compressive strength.
Applications can include industrial floors and warehouses, processing facilities, civic centers, institutional, municipal and residential floors. Mix this product mechanically or by hand. Since hand-mixing generates little shear force, TST recommends allowing the fresh mortar to slake for 5 minutes and then stirring it again.
Top Finish vertical and overhead adhesives are 100 percent concentrate. Application thickness is 1/4 inch by trowel, and it can be used for exterior or interior finishing systems in preparing walls for the final coat. This product can be mixed mechanically or by hand. Since hand-mixing generates little shear force, TST recommends allowing the fresh mortar to slake for 5 minutes and then stirring again.
(586) 604-5828
