Concrete Overlays & Toppings

Overlays and toppings typically range from 1/16- to 3/4- inch deep and are applied to structurally sound concrete slabs to improve aesthetics, protect surfaces and extend life in lieu of ripping out and replacing existing slabs. There are several types of overlays including spray applied, troweled on, self-leveling, stamped and microtoppings.

Concrete with a break in the middle to indicate flexural break

Consider an Overlayment’s Tensile and Flexural Strength

Many often use compressive strength — the ability of a material to withstand compression or pushing it together —  to determine mortar and concrete’s quality. This makes sense for floors and overlayments as the primary forces applied to them are downward, compressive loads from traffic, equipment or anything affected by […]

Quartz Versus Limestone: Which sand is better in concrete overlays?

Concrete overlays’ strength comes from combining specific amounts of portland cement, sand, water and polymer. Sand type is an important component in decorative concrete and concrete overlays because overlays are typically applied thinner than standard concrete, yet still need to withstand the forces of foot and automobile traffic. Research and […]

Today’s Concrete Overlays are Durable and Good Looking

A baker knows when there’s a disaster in the kitchen. However, sometimes a little bit of icing can go a long way toward redemption. Concrete contractors have a similar option with overlays and an unsightly slab: The overlaid section not only looks better, but the chemistry behind today’s concrete overlays […]

There’s an Overlay for Most Any Occasion

Installing overlays onto existing concrete is a cost-effective way to update concrete surfaces by eliminating tear-out costs, minimizing product expense and reducing the manpower needed to overhaul the look and integrity of the existing surface. Overlays for concrete today run the gamut, so there are plenty to choose from. The […]

Laticrete Launches New Polishable, Cementitious Self Leveling Concrete Overlay, NXT Level SP

Laticrete, a leading manufacturer of globally proven construction solutions for the building industry, has introduced NXT Level SP, a coarse-sanded, polishable, cementitious self-leveling concrete overlay with a Salt and Pepper appearance that is designed to function as a high-strength wear surface or underlayment.

Prosoco Launches Liquid Integral Colors for Concrete Overlays

Repair contractors, architects and building owners now have a safer, more consistent option to integrally add color to concrete flooring overlays. Prosoco’s new Integral Color for Overlays is a pre-measured, concentrated liquid. Prosoco designed it to integrally color cement mixtures for overlays and polishable overlays. Available in nine colors, Integral […]

Concrete That Looks Like Wood

New Iberia, Louisiana, located 130 miles from New Orleans, has an elevation of only 20 feet. Wood floors are fine, but in this area prone to flooding, concrete floors are even better. And Keefe Duhon of Concrete Revolution has developed a specialty of concrete floors that look like wood planks, and he’s become known for it across the country.