Topics

The Institute for American Craftsmanship

Vol. 3 No. 6 - December/January 2004 Training & Education by Rosemary Camozzi Comments are Disabled

A new training school in Oregon joins others around the country in promoting excellence in the trades.

Adding Color and Texture to Concrete Skateparks

Stamping & Texturing Concrete Vol. 3 No. 6 - December/January 2004 Staining & Coloring Concrete by Concrete Decor Staff Comments are Disabled

Airspeed Skateparks’ work was featured on the cover of last year’s World of Concrete issue. Since that time they have started incorporating both color and texture into their work, and decorative concrete has become a valuable extension of their skate park design services.

The Smart Chair to Hold Rebar in It’s Place Prior to Concrete Pour

Building with Concrete Tools & Equipment Vol. 3 No. 6 - December/January 2004 by Concrete Decor Staff Comments are Disabled

Smart Chairs were designed by contractors for contractors. Constructed with recycled high-strength polypropylene plastic, the chairs are designed to support steel, eliminate wire ties and stop steel displacement.

Strong and LightweightConcrete

Building with Concrete Vol. 3 No. 6 - December/January 2004 by Concrete Decor Staff Comments are Disabled

Ardex high-tech flooring solution, LT-65 Lite-Tech, is engineered with the strength of portland cement yet weighs only 65 pounds per cubic foot — less than half the weight of normal concrete. Ardex designed this product for deep-fill, lightweight concrete applications where design constraints limit the amount of dead load that […]

How to Use Concrete Sealers

Tips & How-Tos Vol. 3 No. 6 - December/January 2004 Concrete Sealers by Jeff Patterson Comments are Disabled

Concrete is porous and it needs to breathe to let moisture escape. When applied at the manufacturer’s recommended rate, most concrete sealers will remain breathable. However, a blushing problem can occur when sealers are over-applied or reapplied too often. Blushing is a white film that forms when moisture is trapped between the concrete and the sealer.

3 Tests for Measuring Concrete Moisture Content

Vol. 3 No. 6 - December/January 2004 Concrete Placing by Peter Golter Comments are Disabled

Three easy test that can help monitor the amount of moisture remaining in a slab of concrete.

Concrete Helps Architect Fu-Tung Cheng Make a Perfect Cup of Tea

Building with Concrete Vol. 3 No. 1 - February/March 2003 by John Strieder Comments are Disabled

Berkeley architect Fu-Tung Cheng combines ancient custom with modern design.

Decorative Concrete Tips: Pigmenting Liquid Release for Concrete

Tips & How-Tos Vol. 3 No. 1 - February/March 2003 Staining & Coloring Concrete by Clark Branum Comments are Disabled

Liquid release agent is quickly becoming the choice of many decorative concrete contractors. With the increased demand for quicker turnarounds, cleaner job sites and environmental concerns, using liquid release agent for stamped concrete becomes an obvious choice.

Warm up to the opportunities with radiant floor heating

Vol. 3 No. 1 - February/March 2003 Concrete Placing by Susan M. Brimo-Cox Comments are Disabled

Radiant heat delivers warmth without ducts and registers; heats evenly, in an energy-efficient manner; and is silent. There are hydronic (hot water) and electric systems.

Buckets of Integral Colors for Concrete to Go

Vol. 3 No. 1 - February/March 2003 Staining & Coloring Concrete by Concrete Decor Staff Comments are Disabled

Okay, so now you’re sold on this new color technology but don’t know of any ready mix plants in your area that have the proper equipment to produce integral colors. What’s a contractor to do?