GelMaxx has created a nonmechanical solution for the treatment and disposal of concrete wastewater in the grinding, polishing, cutting and coring industries. GelMaxx is a blend of additives designed to process cement-based slurry into reusable water and recyclable solids. The two-part system will separate suspended solids from processed water, then […]

Pacific Concrete Images has created a new series of rubber-mat stamping tools. The Municipal Series of concrete stamping tools is specially designed to combine the patterns and impressions formerly created by aluminum or metal stamping tools with the ease and flexibility of rubber mat stamping. With almost twice the coverage […]

Applied Diamond Tools is offering 5-inch JHX Dry Diamond Polishing Pads. The JHX dry metal-bond diamond polishing pads are designed to polish hard granite and concrete countertops. Velcro- backed and color-coded, they can be used wet or dry at a maximum speed of 4,500 rpm. Each pad is 2 1/2 […]

Applied Diamond Tools is now offering the Klindex UFO Countertop & Floor Polisher. The planetary bench polisher is ideal for grinding and polishing countertops, stairs, small surfaces, edges and narrow areas. The UFO comes as either a single-speed or variable-speed machine. It can be used in both wet and dry […]

Deco-Crete Supply, a decorative concrete materials supplier based in Ohio, is introducing its own line of color hardeners and antique releases. The color hardeners are available in 40 standard colors, are streak-free and are nonfading. The color hardeners and antique releases offer consistency in color from batch to batch. (330) […]

Applied Diamond Tools is now offering the Klindex UFO Countertop & Floor Polisher. The planetary bench polisher is ideal for grinding and polishing countertops, stairs, small surfaces, edges and narrow areas

CS Unitec’s EMF 150 wall slotter cuts parallel channels in concrete and masonry up to 1 3/4 inches wide by 1 3/4 inches deep using two parallel 6-inch diamond blades. They can be easily adjusted for desired cutting depth and width. The EMF 150’s powerful 20-amp motor has a no-load […]

Milwaukee Tool has introduced the M18 Fuel 1/2- inch Drill/Driver (2603-20/22) and M18 Fuel 1/2-inch Hammer Drill/Driver (2604-20/22). Using Milwaukee’s Powerstate brushless motor, the M18 line offers up to 725 inch-pounds of torque.

CS Unitec’s CS 1225 H wet/dry HEPA vacuum captures 99.999 percent of particles up to 0.1 microns, exceeding EPA filtration standards. The vacuum weighs less than 25 pounds and includes a hose adapter to easily connect portable power tools.

Billy Boots has expanded distribution of the Cruiser boot. Molded from lightweight EVA resin, the Cruiser has no seams to leak and no buckles to fail. At just 2.1 pounds per pair, Cruisers are virtual featherweights but still tough enough to stand up to challenges like rebar wire ties.