Applied Diamond Tools is offering 5-inch JHX Dry Diamond Polishing Pads. The JHX dry metal-bond diamond polishing pads are designed to polish hard granite and concrete countertops. Velcro- backed and color-coded, they can be used wet or dry at a maximum speed of 4,500 rpm. Each pad is 2 1/2 […]

Applied Diamond Tools is now offering the Klindex UFO Countertop & Floor Polisher. The planetary bench polisher is ideal for grinding and polishing countertops, stairs, small surfaces, edges and narrow areas. The UFO comes as either a single-speed or variable-speed machine. It can be used in both wet and dry […]

Deco-Crete Supply, a decorative concrete materials supplier based in Ohio, is introducing its own line of color hardeners and antique releases. The color hardeners are available in 40 standard colors, are streak-free and are nonfading. The color hardeners and antique releases offer consistency in color from batch to batch. (330) […]

Applied Diamond Tools is now offering the Klindex UFO Countertop & Floor Polisher. The planetary bench polisher is ideal for grinding and polishing countertops, stairs, small surfaces, edges and narrow areas

CS Unitec’s CS 1225 H wet/dry HEPA vacuum captures 99.999 percent of particles up to 0.1 microns, exceeding EPA filtration standards. The vacuum weighs less than 25 pounds and includes a hose adapter to easily connect portable power tools.

Billy Boots has expanded distribution of the Cruiser boot. Molded from lightweight EVA resin, the Cruiser has no seams to leak and no buckles to fail. At just 2.1 pounds per pair, Cruisers are virtual featherweights but still tough enough to stand up to challenges like rebar wire ties.

The Doosan DXB260H hydraulic breaker features two-speed control of breaker frequency for improved efficiency in demanding demolition and rock- breaking applications. Delivering up to 600 blows per minute, the 5,400-pound DXB260H is designed for use with excavators in the 27- to 37-metric- ton weight range, specifically the Doosan DX300LC and […]

CS Unitec’s EMF 150 wall slotter cuts parallel channels in concrete and masonry up to 1 3/4 inches wide by 1 3/4 inches deep using two parallel 6-inch diamond blades. They can be easily adjusted for desired cutting depth and width. The EMF 150’s powerful 20-amp motor has a no-load […]

Milwaukee Tool has introduced the M18 Fuel 1/2- inch Drill/Driver (2603-20/22) and M18 Fuel 1/2-inch Hammer Drill/Driver (2604-20/22). Using Milwaukee’s Powerstate brushless motor, the M18 line offers up to 725 inch-pounds of torque.

CTS Cement Manufacturing Corp. has announced the discovery of new structures in cement.

Discovered in mixtures of coal fly ash and hydrated calcium sulfoaluminate cement, these intriguing structures consist of micron-sized glass spheres upon which needles have grown radially. While these needles usually grow randomly in CTS’ Rapid Set cement, they organize themselves as spines on round fly ash particles in fly ash/cement mixtures.