The world's foremost resource on decorative concrete
The Sawtec Grinder-Vac concrete grinder features a new, one-piece molded dust shroud that allows for hundreds of hours of use. The shroud, available in convertible models for edging, combines two different hardnesses of polyurethane for increased performance. The softer material used in the shroud allows for greater flexibility to hug […]
Cutting lines, grooves and control joints with diamond blades is nothing new for concrete contractors, but enterprising craftsmen have been putting their creativity to the test by using the blades to produce decorative borders, graphic designs or V-shaped grooves that look like they were hand-tooled.
Crack chaser moves right along The Saw-Tec CC-100 crack chaser, available in gas or electric models, is a high productivity, walk-behind crack-chasing saw that cuts concrete or asphalt to a 1- inch depth. The unit cuts 6 to 8 feet of crack per minute, or up to 3,000 linear feet […]
Seal-Krete Floor-Tex is a waterborne, acrylic, textured coating that can be applied to concrete, wood, plywood and primed metal. It is designed to provide a non-slip, decorative finish to sidewalks, porches, patios, stairs, ramps, pool decks and more. Neutral in color, Floor- Tex can be mixed with any latex floor […]
I was playing around with some ways to fix cracks in my stamped sidewalk at home. Any kind of patch repair will stick out like a red flag on the textured concrete. I liked the idea of using the crack so it would fit into the look of my sidewalk […]
Builders have been using fibers to reinforce clay, plaster, mortar, and concrete since ancient times. According to the fifth chapter of Exodus, Pharaoh knew the value of fiber reinforcement when he commanded the Jews to find their own straw for making bricks.
DTW Associates Inc. has released its first short course on CD, titled “Polymer Alloys and Blends.” The CD presents a comprehensive review of the state-of-art knowledge in theories, principles and practices related to polymer alloys and blends. Its primary emphasis is on the application of fundamentals to real-world problems. The […]
Multiquip has introduced two new trowels, including the first diesel-powered HHN Series mechanical trowel, a 34-hp workhorse with a variable-speed clutch and innovative gearbox design. The turbocharged, liquid-cooled trowel utilizes two helical gearboxes that operate at 98 percent efficiency and virtually eliminate gearbox overheating. The trowel features five blades, finishes […]
Chris McMahon’s high-quality work and bold marketing plan help him stand out from the pack.
VIC International has designed a seam clamp that incorporates all the features needed by installers as well as fabrication shops. It features not only a very positive pull-together feature, but also slab levelers to assure perfect alignment. It also has a rubber “bumper” that can be used to hold backsplashes […]
