The world's foremost resource on decorative concrete
Forming requirements for decorative concrete often involve radius and curved sections. Plastiform™ concrete forms can be used to set up curves as small as a 3-foot bend radius. The forms are very quick to setup using a cam-lock clamp that fastens the forms to stakes.
From start to finish follow these techniques to achieve the perfect acid etched concrete design.
Describing Henry Chapman Mercer’s home, Fonthill, as a castle may be a misnomer. There is no surrounding wall or moat to keep out the unruly peasants or faraway invaders. Nonetheless, Fonthill is so full of treasures — of every conceivable kind — that anything less than “castle” seems inappropriate.
An old technique with new applications. Burnishing can open up a whole array of visual opportunities for concrete surfaces.
Getting to know concrete inside and out will help in properly preparing those surfaces for a topping.
A comprehensive list of important aspects of the faux rock trade. From tool choice to customer expectations, here are some tried and true tips, tricks and techniques to take your faux rock skill to the next level
Deco Pour is an innovative self-leveling terrazzo and decorative overlayment process. This enhanced industrial overlayment is poured thin by using a patent pending integral additive called HDS 2001. Overlayments without this additive are typically softer and will not allow for proper seeding and machine honing of the surface.
Concrete countertops have become the rage in areas ranging from Malibu and Beverly Hills in California, to Omaha, Nebraska, and Boston, Massachusetts. From coast-to-coast these fabulous countertops are growing rapidly in popularity.
The CC-100 is a walk-behind crack chasing saw designed to cut 1-inch depths in concrete or asphalt. Available from Sawtec, the device cuts 6 to 8 feet of crack per minute, or up to 3,000 linear feet in a day, depending on the material. The CC-100 features a swivel caster […]
The creation of a high quality concrete job starts with proper sub-base compaction. Generally speaking, a minimum of 4-inch rock sub-base is required to support the concrete slab cast on grade. The rock sub-base should provide uniform support to the slab without any soft spots.
